Polo Boya Paintpol
Brut Concrete Primer
Product Code:3.155
| Packtype | Number of parcels | Standard | |||
|---|---|---|---|---|---|
| Lt | Kg | Piece | TSE | ||
| - | 3.5/ 12/ 20 | 4/ 1/ 1 | - | ||
PRODUCT DESCRIPTlON:Styren-acrylic emulsion and water based lining paint are used to increase cement and liquids aderance to surface on brut concrete wall and ceiling.
PROPERTIES:Water based and easy to use. It increases the aderance of cement and gypsum plasters. It prevents dehydration of the cement and plaster based coating
APPLICATION:Paintpol brut concrete lining is mixed smoothly for 3-5 mins with a mixer. If it is not used in a short time , the mixing procedure should be repeated until it homogenizes. The mixture is applied on ready surface with a roller.It is to be waited far 24 hours for full protection.After this application in maximum 3 days cement or lining based plaster application must be done. Application temperature must be between +5°c and +30°c.It is not recommended to use in places such as have high humidity like sauna. Bath and bathroom. Application surface must be clean and dry. Application should be done according to the application procedure explained in the leaflet.Paintpol brut concrete lining applied surfaces should be protected against physical impacts for 3 days and against rain, snow, frost and extreme temperatures for 24 hours.Clean the tools with water immediatefy arter application.
Hazard statements: H317 Causes allergic skin reactions.
Precautionary statements: P102 Keep out of the reach of children. P103 Read the label before using. P280 Wear protective gloves / protective clothing / eye protection / face protection. IF IN CONTACT WITH LEATHER P302 + P352: Wash with plenty of soap and water. P333 + P313 If skin irritation or itching occurs: Get medical attention. P404 Store in a closed container. P410 Protect from sunlight.
QUALIFICATIONS
DRYING TIME
Touch free: 1-2 hours, Dry Hard: 24 hours. [+20 °C- %50 relative humidity] (On surfaces like gypsum, concrete, alum it must be applied twice.)
CONSUMPTION
Depending on the surface far one coat 6-7 m2/lt
PACKTYPE
3.5KG 12KG 20KG
STORAGE
It can be stored in the closed , original container in a cool place away from direct sunlight far at least 2 years. Must be protected from frost. [+ 5 °C - +30 °C]