PRODUCT DESCRIPTlON:Long-oil alkyd resin based, super bright finish paint.

PROPERTIES: It has a outstanding features like high hiding power, fast drying, easy brushing, permanent brightness and alsa with resistant to Chemical and physical effects. It can be used on interior/exterior and wood/metalic suıfaces. It is permanent and has high brightness. It has an excelent spraeding, adhesion and protecting features .Ready to use.

APPLICATION:Application surface must be removed from old, blistered, loose paint layers.Level differences on the surface should be corrected with interior and exterior putty or plaster. After sanding ,to lower the consumption of paint and absorbed the dust of putty, with 10% thinning ratio Paintpol synthetic primer should be applied as a one coat. After 12 hours the primer application, paintpol lux bright synthetic paint application could be done. Before the application on the metal surfaces, rust should be removed from old paint layers by wire brushing,sanding and scrappering.Dust,grease and oil should be removed by solvent.After the cleaning with Paintpol antipas, paintpol synthetic primer should be applied as a one coat.New wood surfaces,after the burning the snags,for prevention. Should be applied with Paintpol wood preserver. After that, should be applied one coat of putty and paintpol synthetpc primer. After old painted sutfaces sanded for deaden, required places should be filled with synthetpc putty paint and after the drying should be resanded and applied with paintpol synthetpc antirust Paint Paintpol lux bright synthetic can be applied on every kind of prepared suıfaces with %10-%15 thinning ratio and by roller or brush.Should be wait 8 hours between the layers.

SAFETY PHRASES: R22 harmful if swallowed. S 2 keep aut of reach of the children.S 3/7 /9 keep container tightly closed and in a well ventilated place. S 16 keep away from sources of ignitions. 24/25: avoid skin and eye contact. S29 do not spill into drains. S33 take precautionary measures against static dischargess. 36/37/39 wear suitable gloves and eye/face protection during application. S46 if swallowed , seek medical advice immediately and show this container or label. S51 work in well ventilated areas. S62 do not induce vomiting if swallowed. Please refer to immediate first aid service, show the container or label.

       QUALIFICATIONS

DRYING TIME
Touching: 2-4 hours, Dust repellent: 5-6 hours, Drying Hard: 12 hours. [+20 °C- %50 relative humidity]
CONSUMPTION
With 1 Lt at the first coat 16 m2/Lt
PACKTYPE
0,250 LT-0,375 LT-0,750 LT-2,5 LT-15 LT
STORAGE
It can be stored in the closed , original container in a cool place away from direct sunlight far at least 2 years. Must be protected from frost. [+ 5 °C - +30 °C]

CONTACT US

TO GET INFORMATION ABOUT THE PRODUCTS