Polo Boya Paintpol
Mineral Coating Primer
Product Code:3.154
| Packtype | Number of parcels | Standard | |||
|---|---|---|---|---|---|
| Lt | Kg | Piece | TSE | ||
| 15 | - | 1 | - | ||
PRODUCT DESCRIPTlON:Acrylic copolymer emulsion based, white, filled exterior mineral coating.
PROPERTIES: It has a high adhesion power. It obtains peculiar adhesion between application surface and insulation coating.Preventing dirt and stains of the old surfaces to reveal on the insulation coating.It is white and has a high hiding power.Beside making the surface rough,it also decreases water suckness of the wall.
APPLICATION:Application surfaces should be dry and removed from any kind of dirt. If the surface painted by solvent base paint before,tiıe surface must be cleaned from ocsit by sanding. It can be applied directly to the interior/exterior surfaces that will be painted at first time and emulsion based surfaces with brush,roller or pistole. Stir before use until a homogeneous dispersion [mixture] is obtained. Application surface and air temperature should be between min. + 5°c and +30°c. Do not apply on the windy and directly sunlighted surfaces. Advised applied on one coat before tiıe insulation coating.
Hazard statements: H317 Causes allergic skin reactions.
Precautionary statements: P102 Keep out of the reach of children. P103 Read the label before using. P280 Wear protective gloves / protective clothing / eye protection / face protection. IF IN CONTACT WITH LEATHER P302 + P352: Wash with plenty of soap and water. P333 + P313 If skin irritation or itching occurs: Get medical attention. P404 Store in a closed container. P410 Protect from sunlight.
QUALIFICATIONS
DRYING TIME
Touch free: 1 hours, Dry Hard: 24 hours. [+20 °C- %50 relative humidity]
CONSUMPTION
Depending on the surface far one coat 3-4 m2/lt
PACKTYPE
15 LT
STORAGE
It can be stored in the closed , original container in a cool place away from direct sunlight far at least 1 years. Must be protected from frost. [+ 5 °C - +30 °C]