PRODUCT DESCRIPTlON:Long-alkid oil resin based, semigloss finish paint.

PROPERTIES:It is a semi-gloss finish interior paint which is forming excellent and cleanable surfaces with satin sensation,has a non-fading, non-yellowing and long-lasting colors also with high hiding power and adhesion.

APPLICATION:Application surface must be removed from old, blistered, loose paint layers.Level differences on the surface should be corrected with interior and exterior putty or plaster.After sanding ,to lower the consumption of paint and absorbed the dust of putty, with %15 thinning ratio paintpol syntethic primer should be applied as a one coat. After 12 hours the primer application, paintpol semi-gloss satin application could be done.Before the application on the metal surfaces, rust should be removed from old paint layers by wire brushing,sanding and scrappering. Dust,grease and oil should be removed by solvent.Arter the cleaning witiı paintpol antipas, paintpol synthetic primer should be applied as a one coat.New wood surfaces, after the buming the snags, for prevention, should be applied with paintpol wood preserver. After that, should be applied one coat of putty and paintpol synthetic primer. Paintpol satin semi-gloss synthetic can be applied on every kind of prepared surfaces with %10-%15 thinning ratio and by roller or brush.Should be wait 8 hours between the layers.

SAFETY PHRASES: R22 harmful if swallowed. S 2 keep aut of reach of the children.S 3/7 /9 keep container tightly closed and in a well ventilated place. S 16 keep away from sources of ignitions. 24/25: avoid skin and eye contact. S29 do not spill into drains. S33 take precautionary measures against static dischargess. 36/37/39 wear suitable gloves and eye/face protection during application. S46 if swallowed , seek medical advice immediately and show this container or label. S51 work in well ventilated areas. S62 do not induce vomiting if swallowed. Please refer to immediate first aid service, show the container or label.

       QUALIFICATIONS

DRYING TIME
Touching: 3-4 hours, Dust repellent: 7-8 hours, Drying Hard: 12 hours. [+20 °C- %50 relative humidity]
CONSUMPTION
Depending on the surface at the first coat 15-20 m2/lt
PACKTYPE
-0,750 LT- 2,5 LT- 15 LT
STORAGE
It can be stored in the closed , original container in a cool place away from direct sunlight far at least 2 years. Must be protected from frost. [+ 5 °C - +30 °C]

CONTACT US

TO GET INFORMATION ABOUT THE PRODUCTS